I-view IR-5MIPN42 5-Megapixels IR Bullet IP Camera Instrukcja Użytkownika

5/3/2-MEGA PIXELS NETWORK CAMERA IR-5MIP566/ IR-3MIP566 Version: V1.3 Doc. No.: 103022001 USER MENU IR-5/2MIPN/2MIPS/

10 I/O Port Standard: Audio in (2Vp-p); Audio out (30mW/600 ); DC power in, RJ-45 (LED indicates power /linking status). Full function: Alarm in x1

11Housing Waterproof IP67 housing with anti-cut cable and 3-Axis bracket. Dimension/Weight 310mm (L) x 100 mm (W) x 85 mm (H) / 0.98Kg; (Includin

12 External Microphone input; Speaker output. 2Vp-p audio input and audio output with 600 impedance. Network Protocol: HTTP, HTTPS, TCP/ IP, IPv4,

13 Time management: Manual Time Setting; Time Server and NTP support; Real Time Clock. Event management: Events triggered by motion detection or sens

14 D-WDR: 76dB Overlay: Text / Time Stamp Audio Setting -Low/ a-Low G.711 audio encoding and decoding; 2-way audio. External Microphone input; Spea

15 Storage Micro SD slot for SD/SDHC card storage; Support Pre-recording and Post recording; Network failed start recording on SD card, Backup/Rest

16 Sub streaming: 320×288, 320*240 Frame Rate: 3-Mega: 20 fps; 1080p: 30 fps @ H.264/M-JPEG Mode; Frame rate can be adjustable by user. Streaming: Mu

17 16.8KA(1-Time)/8.4KA(2-Times) @8/20µs (1 Time); Insulation Resistance:10000M . Lens & IR Illuminators Lens: f=3 9 mm/ F1.2 F2.3 (IR-3MIPW42-

18 1-3. Packaging Contents Please check the contents of your new Network IP Camera when you unpack the package. If any item is missing, please c

19 1-5. Product Parts Description  Front side items description: 1. Sunshield: It protects the camera from the direct sunlight. 2.

2Safety information This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

20 2. Power cable: Connect to DC12V power adapter when use none POE Hub 3. Network port: Plug the RJ-45 LAN cable of POE switch Hub. The Green LED on

21 Chapter 2. Camera Installation 2-1. Wall Mount installation  Fix the camera This camera is waterproof and in compliance with the IP66 spec,

22  Adjust camera angle from bracket mount (Please refer the photo as below) 1) Use the Hexagon wrench to loosen the bolt and to rotate the br

23 Chapter 3. Running IP Camera by Witness Pro NVR software 3-1. Network Deployment General Connection (without PoE) 1. Connect RJ45 Ethernet

24 Fig. 1-3-1.2 Choose a setup language Fig. 1-3-1.4 Installation Startup 3-2. Install Witness Pro NVR software You can use your new Network IP Came

25 Step 5. Click the “Browse” button to install into a different directory, otherwise click on the “Next” button to install the software into the

26 3-3. Setting IP camera for Witness Pro NVR software Click “ Start “ >> “ All Programs” >> “Witness NVR32 Pro”, then select the “ Vid

27 used camera support Onvif compliant from: http://www.onvif.org. Click “ Onvif setup “ icon to setup the parameters which you want to run on the

28 setting process. For the detail information, please refer to the IP camera operation menu.  HTTP port & RTSP port: The both port number must

29 Chapter 4. Running IP Camera by I.E. Browser You can use your new Network IP Camera by its web user interface via I.E. web browser. The requirem

3filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects. 7. If any unusual sme

30 Step 2. Press “Search “button to search for all IP Cameras on your local network. Step 3. If you need to change IP address, double click

31  IE 8 and earlier version: Right click the indication bar and click: “Install This Add-on for All Users on This Computer…” to install ActiveX plu

32  IE 10 version: Click ‘Install’ button located at the bottom of I.E. to install ActiveX plug-in. You need to do the process as below: Click “I

33 4-2. The Function Description of Live Window After ActiveX plug-in is installed, you should be able to see the live video from IP camera as be

34 7. Screen: Choice the video streaming on the screen. 8. View: Click this icon to display the video of IP camera. 9. Play Mode: Click this ic

35 4-3. The Network setup Function Description Click “ Setup “ icon to start setup the parameters of IP camera. You can configure basic IP cam

36 configured before you operate the IP camera over network. IPv4 and IPv6 are both supported. Configure the NIC settings, including the IPv4 (IPv6

37 click Save to change the setting.  QoS: Click this button to adjust the QoS (Quality of Service) volume and it can help solve the

38 (2) Set the date of the DST period then click to save the settings. Manual setup: Configuring Time Synchronization Manually. (1) Check the Manual

39  UPnP: Click this button to enable the UPnP (Universal Plug and Play) function. UPnP™ is a networking architecture that provides compatibility am

4IMPORTANT SAFETY INSTRUCTIONS  Read these instructions.  Keep these instructions.  Heed all warnings.  Follow all instructions.  Do not use thi

40 Before you start, please registration on the DDNS server is required before configuring the DDNS settings of the IP Camera. Please do the proce

41  Mobile Phone Viewer: Click this button to enable IP camera for the mobile or Table PC remote viewing, this function can suit for the Android, iP

42  Streaming: Configuring Video streaming settings as below:  Source Resolution: Select video main streaming resolution from the

43 higher bitrates (and therefore more storage space) to be allocated to the more complex segments of media files while less space is allocated to le

44  Scene setup:  White balance: There are some scene modes to difference environments, such as Auto, Cloudy, Sunny, Tungsten and Fluorescent mode

45  OSD: Allow to paste text (Device name) and time stamp on the video.  Basic setup: You can choice the font size and transparency for the text

46  Privacy Mask: Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the surveillance area from being liv

47  I/O & PTZ setup: You can setup the alarm input/output and PTZ protocol from this section.  PTZ: Setup the PTZ parameters such as Baud

48  Motion alarm: Enable Motion detection function and you can setup the trigger schedule and detection area. Click and drag the left button of M

49  Recording: Click this button to setup the type of triggered recording, storage media and schedule recording. You can setup the Pre recording &am

5SAFETY INFORMATION FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: 1. This dev

50 For example, if an alarm triggers recording at 10:00, and the pre-record time is set as 5 seconds, the IP Camera starts to record at 9:59:55.  Po

51  “FTP server”: Setup the recording path via FTP server mode. The detail information of FTP server, maybe need to ask the MSI people.  “SD Card

52  User: Click this button to create a new user or delete/ modify available user. There are three user accounts, Media user, Operator and Admini

53  Reset: You can choice reset the IP address or all parameters become to the default setting. Click the “ Reset IP address “ icon just let the I

54 Chapter 5. Troubleshooting Before you send this IP Camera back to your dealer when you found this IP Camera is not working properly, please chec

55

6About This Guide Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols to use thro

7Table of Contents Chapter 1. Introduction ---------------------------------------------------------------------------------------- 8 1-1. Highlights

8Chapter 1. Introduction 1-1. Highlights of your new Network IP Camera Congratulates on purchasing this high-resolution 5M pixels network IP Camer

91-2. Product Specification IR-5MIPN42 Series System Platform: TI DM368 SoC CPU; Linux Embedded O.S. Image Device 1/2.5" 5 M pixels (2592x 1